• Register
Post news Report RSS Dev Diary 11 – Orbiting Planets in Starflight: The Remaking of a Legend

We're back for more news! This time Marvin creates HUNDREDS OF PLANETS for us to orbit with accurate surface maps (1:1 with original game) and beautiful clouds in his Starflight: The Remaking of a Legend project. Next article will cover alien encounters! :)

Posted by on

We're back for more news! This time Marvin creates HUNDREDS OF PLANETS for us to orbit with accurate surface maps (1:1 with original game) and beautiful clouds in his Starflight: The Remaking of a Legend project. Next article will cover alien encounters! :)

Initiating Orbital Maneuver

(Originally posted by Marvin 15/09/2018 HERE)

That’s right! We can now orbit around any planet in the game. And not only that, we can also use the sensors to scan the planet and have the science officer analyze the sensor results (but the game does not take his skill level into account yet).

A few other improvements have been done also. Ship acceleration math has been fine-tuned and now follows very closely to the original game for class 1 to 5 engines with any amount of ship mass. Check out the graph below – the blue line shows the acceleration points for the original game, and the red line shows the curve generated by the formula I developed.

Acceleration Curve

The winning formula:

acceleration = ( ( 500 – mass ) / 500 ) ^ 3.5 ) * 1.75 * maxAcceleration + engineClass

The resulting acceleration is in G units and is rounded to the nearest integer. Note that the top speed for all engine classes is the same – it’s only the acceleration (how quickly you can dodge missiles and escape encounters) that changes. This acceleration code is now in the remake and is working.

I have also updated the area beside the main viewport in space flight mode. It is currently a circuit board texture, and I think it’s just a placeholder until (maybe never?) I find something better.

The ship in space flight mode now shows the correct number of cargo pods that you have purchased, along with showing the laser and missile turrets only if you have purchased them. The status display does the same now.

The video below shows the orbit, sensors, analysis, and de-orbit working in the remake. What do you think?


Planet Generator – Sneak Preview

(Originally posted by Marvin 20/09/2018 HERE)

Yes, I am still alive!

I realize I have disappeared for the past few days. No, I have not been binge drinking laying around in various gutters around the city. I’ve actually been working hard on the Starflight remake!

This is what I am doing – I am creating a planet generator for the game. This planet generator takes in the planet map from the original game and upscales it, adds mountains, hills, and so on. Currently being created are the albedo (color), normal (bump), height (parallax), and roughness (shininess) maps. I also created a test environment in the game where I can play around with some planet generator controls to fine tune stuff.

And yes… here is a video. Break out the popcorn!


Final Planet Generator (Non-Gas Giants)

(Originally posted by Marvin 01/10/2018 HERE)

Final Globe

My fellow Arthlings!

Over the past couple of weeks, I have been working on the planet generator for this Starflight remake. As many of you will know, the planet generator for the original game was one of their proudest moments. Inside the cover of the original Starflight box, there is a blurb about their planet builder:

About nine months after we started the actual programming, we came up with the idea for the fractal generator. A fractal generator so powerful that it could create surfaces in space. It took 6 man-years to create the technology, but it gave us the ability to cram 800 complex and unique planets into each game, instead of the 50 we’d had before. There are so many that even we haven’t explored them all.

On the back of the box, you will also note that they say it took 15 man-years to create the entire game. If you do the math, this means a full 40% of the entire development time was spent on just creating this fractal planet generator for the original game.

So, as not to insult the spirit of this game, I decided to dedicate a lot of time into also creating a fractal planet generator for this remake. And lo and behold, here it is!

The generator starts with the original color and key of the planet. The color and key are grabbed from screenshots taken while in orbit around the planet and the Captain > Land menu item is selected.

Screenshot

The first image is the original color extracted from the screenshot, and the second image is the height map extrapolated from the color key in the screenshot. These images are 48 by 24 in size. Not a lot of detail!

Original ColorOriginal Height


The next image shows what our 3D planet would look like with the original color map applied to it, without any modification.


Step 1 – Padding

The first step is to add some padding to the top and bottom (North and South) of the original color maps. Why? Because these maps are supposed to be equirectangular maps that are applied to a spherical object. Let’s take a look at a real equirectangular map (see first image below). Notice the North and South ends of the map are stretched out horizontally. The white snow of Antarctica stretches all the way from the West end to the East end of the map. This is because those ends of the map actually correspond to a single point on the globe! So, what happens if we have multiple colors on those ends of the map? You get pole pinching (see the second image).

Equirectangular Map

Pinched Poles


To avoid pinched poles, we add some padding to the top and bottom of the original map. What we pad the top and bottom with are selected by determining what the most used colors at the poles are. Here is the result – compare it with the original height map. I add 3 rows of padding on each side, making the map now 48 by 30 in size.

Padded Map


Step 2 – Contours

The next step is to increase the size and resolution of this height map. I have decided to implement a routine that I call “contours” generation. What it does is it sub-divides each pixel in the original color map into 2 by 2, and then each sub-pixel is replaced by either an “outside corner,” or an “inside corner,” or a “solid corner” tile based on the 3 by 3 pattern for each sub-pixel. The following images are the inside and outside corner tile images. The solid corner is just a solid fill. Note that these tiles are 21 by 17 in resolution. The reason is explained below.

Inside Corner Outside Corner


Our target map resolution is 2048 by 1024. Since our height map currently has a resolution of 48 by 30, this means we need to scale up by a factor of 42 by 34. This will make the contours map 2016 by 1020. Since each pixel in the original map is subdivided into 2 by 2, this means each tile needs to be half the size of the scale factor, meaning they need to be 21 by 17 each. The following image shows the result of the contours generation step.

Contours Generation


Step 3 – Scale to Power of Two

Now that’s looking a lot better already. For the next step, we need to scale that image up a little bit more so that it is truly 2048 by 1024. The naive approach is to just use bilinear filtering to scale it up. While that will work, it will blur the image just a tad bit. We want to keep this image as crisp as possible. So, instead of using bilinear filtering to scale the image up, I pad the top and bottom with rows of the same elevation value as used in step 2. That takes our vertical resolution from 1020 to 1024 by adding 4 rows. For the horizontal scaling, I duplicate some columns. I very cleverly select only columns that are on the centerline of each 2×2 tile to duplicate. That avoids duplicating edges, which would be very noticeable. The first image below is the result. I bet you can’t tell the difference between that image and the one above. The second image below indicates which columns I selected to duplicate (click on it to zoom in). The third image shows what a 3D rendering of the planet looks like now.

Scale to Power of Two

Duplicated Columns


Step 4 – Blur Pass

Now that we have a clean elevation map with a power of two horizontal and vertical resolution, it’s time to start doing some really interesting things to it. The first thing I do to it is to use a Gaussian blur filter to blur the elevation map. I blur it twice, first with a large blur kernel, and then with a smaller kernel. In between the two blurs, I reset the elevation to zero, where there is water. This gets me nice big blurs where the mountains should be, and a smaller blur to blend land into water (beaches). The first image below shows the result of the two blur passes. The second image shows an elevation profile, with the red line indicating the original elevation profile, and the blue line indicating the new elevation profile after the blur is complete. The third image shows what a 3D rendering of the planet looks like now.

Gaussian Blur Gaussian Blur Profile


Step 5 – Mountains and Hills

Now that we have a nice smooth elevation map, it is time to add some details. We want mountains in the higher elevations and hills in the lower and middle elevations. To do this, I apply some fractal noise. For the mountains, I use the “ridged” variation of Perlin noise, and for hills, I use standard Perlin noise. The first image shows the new elevation map after this process has been applied, and the second image shows the new elevation profile. The third image shows what a 3D rendering of the planet looks like now.

Mountains and Hills

Mountains and Hills Profile


Step 6 – Hydraulic Erosion

Most people would be content with what has been done so far. Not me! Remember, the original crew spent six man-years developing the original fractal planet generator. SIX! Surely, I can spend a few more hours on this. So… bring in the hydraulic erosion machine! What is hydraulic erosion? It’s just a fancy way of saying soil erosion due to moving liquids (like rain). The problem with using a fractal noise generator to create mountains and hills is that they do not account for the millions of years of soil erosion from rain. Rain carves channels and rivers into solid granite rock. Rain gave us the grand canyon. And so, rain will give us beautiful worlds for this Starflight remake.

I made it rain, the likes that have not been seen since the days of Noah. Two million, 97 thousand, and 152 drops of rain each planet to be exact; one for each grid point on the elevation map. Each drop of rain is tracked as it hits the terrain and makes it way down to lower elevations. As the raindrop meanders throughout the elevation map, sediment is absorbed and deposited along the way. The full details of how this process works are too much for this blog, but you can find them in the code in Github.

The following images show the changes in the terrain after some rain. The red areas indicate where sediment has been removed from the terrain. The green areas indicate where sediment has been added to the terrain. The first image shows changes after about 65,000 drops of rain. The second image shows changes after about 1 million drops of rain. The final image shows changes after all 2,097,152 drops of rain have been processed.

Drops - 65 ThousandDrops - 1 MillionDrops - 2 Million


The next image shows what the terrain height map now looks like. Click on it to zoom in and see the details.

Hydraulic Erosion

Step 7 – Albedo Pass

For our next trick, we will convert the terrain height map into colors. We do this by using a massaged version of the color key of the map from the original game. This is a pretty straightforward process. The image below shows the result.

Albedo (Color) Map

Step 8 – Effects Pass

Now it is time to create the effects texture map. What is an effects texture map? In our case, it is a texture map where the red, green, and blue channels control the parameters of some special effects applied during the shading process. The red channel controls the “roughness” of the terrain. The rougher the terrain is, the duller the specular shine will be. The green channel controls where “water” appears on the map. This channel is used to mask out where the animated water waves will be rendered. And then finally, the blue channel controls the “reflectivity” of the terrain. Water is where the terrain is most reflective – and this channel is somewhat related to the red (“roughness”) channel. The image below shows the effects map.

Effects Map

Step 9 – Normals Pass

Everything looks great so far, but we need to add one more texture map. This is called the “normal” map. It describes the facing direction of each point on the surface and affects all of the lighting calculations. The planet generator simply looks at each point on the map and compares its height with all of the surrounding points on the map, and figures out from that what direction that point on the surface is facing. The result is coded as a color map, but it is not actually color data. The colors are actually unit vectors, where the red, green, and blue channels represent the X, Y, and Z components of the vector. Here is the normal map image.

Normal Map

The Final Result

Put it all together, and this is what we have.

Final Globe

I have implemented multi-threaded processing for most of the steps of the planet generator. Even with everything nicely threaded, it still takes up to 2 minutes to generate all of the texture maps on my 10-core Area-51 Alienware machine. Do the math – 811 planets x 2 minutes = a little more than 24 hours to generate texture maps for every planet in the game. But really it will be far less than this, as I plan to have a completely different (and much faster) process for gas giants.


Forecast: Cloudy

(Originally posted by Marvin 20/10/2018 HERE)

I’ve gone and added clouds to the remake.

After some searching, I came across a free Unity Asset store add-on called Simple Dynamic Clouds by Butterfly World. It’s a very simple dynamic cloud effect that incorporates moving UV coordinates to simulate fractal Brownian motion (FBM) using some specialized texture maps. However, it was too simple to use as-is as it generated only the color (albedo). So… I went into the code and added support for bumps (normals) and specular lighting. That made it look much better.

To add the clouds to the game, I created a thin shell around each planet and applied the new clouds material and shader to it. The atmospheric density of each planet controls how thick the cloud layer appears. Also, if the planet is a molten planet, the clouds will appear dark instead of white and fluffy.

Here are some screenshots! All of this is included in the latest game download. Note: The clouds animate very slowly – you’ll see different patterns form up and dissipate.

Very Thin CloudsVery Thin Clouds - Molten World

Thin CloudsModerate Clouds

Thick CloudsVery Thick Clouds


Comments
Ogreatgames
Ogreatgames

Cool post! I remember Starflight being a wonderful space exploration action-rpg. And it was also one that paved the way to a sandbox game. I love how it was designed by Greg Johnson. The same legend who designed another Genesis gem - ToeJam & Earl. It's nice to see someone paying tribute to the game by reviving some of its parts using Unity.

Reply Good karma Bad karma+3 votes
Post a comment
Sign in or join with:

Only registered members can share their thoughts. So come on! Join the community today (totally free - or sign in with your social account on the right) and join in the conversation.

News
Related Games
Related Engines
Unity
Unity Commercial
Related Groups
Brave Army Games
Brave Army Games Developer with 3 members
PC Gamers
PC Gamers Hardware & Tech with 743 members
Science Fiction Fans
Science Fiction Fans Arts & Literature with 782 members
Unity Games
Unity Games Hobbies & Interests with 1,812 members